META MULTISTRONG Light & Medium cantilever rack

the medium-heavy cantilever rack with arm loads up to 1179,47 lbs.

The META MULTISTRONG cantilever rack has proven itself in all types of long goods storage: 
from small compact rack rows to light and medium weight long goods through to high-rise cantilever racks for heavy sections and sheet goods. MULTISTRONG cantilever racks give you stable brand quality, numerous extension options and rapid access to goods. This will increase your warehouse productivity.

 

META cantilever racks are the benchmark for the storage of light-weight long goods. They can be extended systematically for the widest variety of requirements and they provide the utmost operating safety. The cantilever arms are secured to prevent unintentional lifting of the arms when goods are being deposited or removed. The adjusting screw is tightened to produce an even tilt. It also produces a firm connection between the cantilever arm and the upright.

 

 

META MULTISTRONG L

  • For horizontal/vertical storage of sheet goods and panels
  • Hot-rolled IPE 120 sections; perforated on both sides for possible future retrofits
  • Cantilever arm load up 485,017 lbs, with load evenly distributed.
  • Load on uprights up to 7627,994 lbs for cantilevered levels
  • Foot level load up to 5 times the load capacity of the arms
  • Cantilever arms can be attached at 3.937 inch intervals
  • Cross-bracing in each bay for easiest possible assembly and secure stability
  • Surface in RAL 5010 gentian blue
  • Standard frame height: 78.740 inch, 98.425 inch, 118.110 inch
  • Standard spacing: 40.551 inch, 52.362 inch
  • Standard arm depth (single-sided and double-sided): 15.748 inch, 
    19.685 inch, 23.622 inch

META MULTISTRONG M

  • For horizontal/vertical storage of sheet goods and panels
  • Hot-rolled IPE 140 sections; perforated on both sides for possible future retrofits
  • Cantilever arm load up 1179,47 lbs, with load evenly distributed.
  • Load on uprights up to 12698,63 lbs for cantilevered levels
  • Foot level load up to 5 times the load capacity of the arms
  • Cantilever arms can be attached at 3.937 inch intervals
  • Cross-bracing in each bay for easiest possible assembly and secure stability
  • Surface in RAL 5010 gentian blue
  • Standard frame height: 78.740 inch, 98.425 inch, 118.110 inch, 137.795 inch
  • Standard spacing: 40.551 inch, 52.362 inch
  • Standard arm depth (single-sided and double-sided): 15.748 inch, 
    19.685 inch, 23.622 inch, 31.496 inch
IM KATALOG ANSCHAUEN IM SHOP KAUFEN

Safety Instructions

If the height/depth ratio ≥ is 5 : 1 or the operational conditions require it, foot anchorages must be used.

 

 

Examples

Double row shelves with pre-mounted
Frame & diagonal bracing

  • Both lines firmly connected on the back, access side on both sides
  • Consistent use of space through "back-to-back" construction

Single and double row large shelving units

  • with pre-assembled frame & diagonal bracing
  • Compartment length 1,300 mm for large-volume stored goods

Shelf modules, cabinet modules, magazine equipment

  • META shelving, cupboard and magazine equipment,
    t
    hese are flexibly combinable modules for the furnishing of enclosed
    Work areas such as workshop, magazine and warehouse
  • the cabinet modulescan be easily integrated into complex shelving systems
  • individual combination
  • extensive accessories
  • disassembled delivery

REFERENCES